Accessories
Air Purge Collar
The lens must be kept clean at all times from dust, smoke, fumes and other contaminants in order to avoid
reading errors. These effects can be reduced by using an air purge collar. Make sure to use oil-free,
technically clean air, only.
Air purge collar [TM-AP-CTL]
Hose connection: 6x8 mm
Thread (fitting): G 1/8 inch
thermoMETER CTVideo
The needed amount of air
(approximately 2 ... 10 l/ min.)
depends on the application and the
installation conditions on-site.
19
Need help?
Do you have a question about the CTVM-1L and is the answer not in the manual?