MICRO-EPSILON CTVM-1L Instruction Manual page 39

XHEAD Setup of the Ambient temperature compensation. In dependence on the emissivity value
of the object a certain amount of ambient radiation will be reflected from the object surface.
To compensate this impact, this function allows the setup of a fixed value which represents
the ambient radiation.
If XHEAD is shown the ambient temperature value will be taken from the head-internal
probe.
To return to XHEAD please press Up and Down together.
Especially if there is a big difference between the ambient temperature at the object and the head temperature the
use of Ambient temperature compensation is recommended.
M 01 Setup of the Multidrop address. In a RS485 network each sensor will need a specific
address. This menu item will only be shown if a RS485 interface board is plugged in.
B 9.6 Setup of the Baud rate for digital data transfer.
thermoMETER CTVideo 37