Selecting A Menu And Configuring Basic Settings - Gossen MetraWatt ProFiTEST C-GB int. Operating Instructions Manual

3.4

Selecting a Menu and Configuring Basic Settings

START
Press the or the key in order to display the desired measuring
function, the desired device settings or the database functions.
Default Settings – Last Used Settings
A selection can be made here as to whether the menus will be displayed
according to the default settings, or if the last opened menus should be
displayed.
8
➭
Activate the setup key.
➭
Press the default key:
✓
on Settings such as I , half-waves etc., as well as T
N
are reset to the default settings when the instrument is switched
on.
✓
off The last used settings remains when the instrument is switched
on.
➭
Exit the setup menu by pressing the
Setting On-Time, Manual Shutdown
➭
Activate the setup key.
➭
Press the T key and then the 10sec, 20sec, 30sec or 60sec key depend-
on
ing upon the desired duration after which the test instrument should
switch off automatically. The ">>>>>" setting indicates that automatic
shutdown will occur. The selected setting has a substantial influence
on battery service life.
➭
Exit the setup menu by pressing the
The instrument can be switched off manually by simultaneously activating the two
outermost softkeys.
(= 20 sec.)
on
key.
key.
GMC-I Messtechnik GmbH