Downloading A Software Update, Managing Report Data - Gossen MetraWatt ProFiTEST C-GB int. Operating Instructions Manual

3.5

Downloading a Software Update, Managing Report Data

If you require an updated test instrument software, it can be downloaded
with the help of WinProfi* PC software. The data file with the desired soft-
ware version is transmitted to the test instrument via the serial interface.
The previously installed language is overwritten.
Note
This software includes all of the functions required for communica-
tions between the PROFiTEST
program is included in the online user's manual which can be
accessed from WinProfi.
WinProfi Software
* WinProfi can be used currently up to Windows 7 (32 bit)
10
®
C and the PC. A description of the
A Install WinProfi to the PC and Start the Program
➭
Download the WinProfi software from our homepage:
http://www.gossenmetrawatt.com
( Products  Software  Software for Testers  WinProfi)
➭
Unzip the zip file „winprofi.zip".
➭
Install the software on your PC by executing file
Setup_WinProfi_Vx.xx.exe.
➭
Select the desired language for the WinProfi software and for the user
interface of the test instrument.
➭
Follow the instructions which appear at the monitor.
The program is added to your start menu after installation.
➭
Establish a c onnection between your PC and the PROFiTEST
test instrument by using the IrDa-USB converter.
➭
Start WinProfi.
➭
Switch on the test instrument.
➭
Set the on-time period of the PROFiTEST
enough time for adjusting the settings in WinProfi before the test in-
strument switches off again automatically, see chapter 3.4.
Display or print out online user's manual
The online manual contains information concerning the software which is
not included in these operating instructions.
®
C
®
C to „>>>>>" to give you
GMC-I Messtechnik GmbH