Control Connections; Lan; Rs232; 3D Sync In And 3D Sync Out - Digital Projection INSIGHT Dual Laser 4K Series Installation And Quick Start Manual

Digital Projection INSIGHT Dual Laser 4K Series

Control connections

LAN

RJ45 socket

RS232

9 way D-type connector
Pin RS-232C Functions as RS-232C
No. Signal Name
1 CD Carrier detection
2 RXD Reception data
3 TXD Transmission data
4 DTR Data Terminal ready
(Note)
5 GND Signal GND
6 DSR Data set ready (Note)
7 RTS Transmission request
8 CTS Transmission available
9 RI Ring indicator

3D Sync IN and 3D Sync OUT

75 ohm BNC
Reference Guide
APPENDIX D: WIRING DETAILS
Projector Connector Operation
Not used (N.C.)
Data transmission to an external device
Data reception from an external device
Connection to 6 pins
Signal GND
Connection to 4 pins
SYSTEM: Hi-Z (Not used)
CINEMA: Hi-Z (Used)
SYSTEM: Fixed at -6.5 V (Not used)
CINEMA: ±10.5 V (Used: Depends on
communication status)
Not used (N.C.)
Update port

RS232:

pin view of female connector
pin view of female connector
Notes
Only one remote connection (RS232
or LAN) should be used at any one
time.
Rev A October 2017
page 70