Table of Contents
Advertisement
Digital Projection E-Vision 6900 Series
Control Connections
HDBaseT/LAN
1
Receives digital signal from HDBaseT-compliant
devices.
All of the projector's features can be controlled via
a LAN connection, using commands described in
the Remote Communications Guide.
Service
2
The USB Service port is used for firmware
updates only.
Screen Trigger
3
The Trigger output can be connected to an
electrically operated screen, automatically
deploying the screen when the projector is
switched on, and retracting the screen when the
projector is switched to standby.
RS-232
4
All of the projector's features can be controlled via
a serial connection, using commands described in
the Remote Communications Guide.
3D Sync Out
5
Connect to a Z Screen or 3D IR emitter as
appropriate.
3D Sync In
6
Connect the 3D sync from your graphics card or
server.
Wired Remote
7
The remote control can be connected using a
standard 3.5 mm mini jack cable (tip-ring-sleeve,
or TRS).
Connection Guide
CONTROL CONNECTIONS
1
2
4
5
6
7
Notes
3
Plugging in the remote control cable
will disable infrared transmission.
Rev A February 2017
page 22
Advertisement
Table of Contents
