Chapter 3 Storage System Monitoring; Checking Led Status; Displaying Status Via Eternus Web Gui; Figure 3.1 Eternus Web Gui Screen - Fujitsu ETERNUS DX600 S3 Basic Operation Manual

Chapter 3
Storage System Monitoring
This chapter describes the status monitoring of the ETERNUS DX.
3.1

Checking LED Status

The status of the ETERNUS DX can be checked by the LEDs.
If the FAULT LED in the operation panel is amber, contact your maintenance engineer.
3.2

Displaying Status via ETERNUS Web GUI

The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked in the
Overview screen of ETERNUS Web GUI.

Figure 3.1 ETERNUS Web GUI Screen

Table 3.1 shows the general status.
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
50
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0