Figure 1.7 Battery; Table 1.3 Status And Meanings Of Each Led (Battery) - Fujitsu ETERNUS DX600 S3 Basic Operation Manual

Chapter 1 Component Name/LED Name
1.1 Controller Enclosures
■
Batteries
Batteries are used for backup power source in case of power outage.
Batteries have LEDs.
Figure 1.7 shows the battery.

Figure 1.7 Battery

1. BRDY LED
2. CHG LED
3. BCA LED
4. BTA LED
The states of LEDs are listed below.

Table 1.3 Status and Meanings of Each LED (Battery)

LED name
BRDY
(Battery Ready)
CHG
(Charge)
BCA
(BCU Alarm)
BTA
(BTU Alarm)
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Table 1.3 shows the status and meanings of each LED.
1 2 3 4
LED status Meaning
The battery charge rate is 90% or more.
(green)
The battery is being charged or is ready for discharge.
(green)
The battery is in error status.
(amber)
The battery is in error status.
(amber)
17
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0