3.
Storage System Monitoring
This chapter describes the status monitoring of the ETERNUS DX.
Checking LED Status
The status of the ETERNUS DX can be checked by the LEDs.
If the FAULT LED in the operation panel is amber, contact your maintenance engineer.
Displaying Status via ETERNUS Web GUI
The status of the ETERNUS DX and the usage status of RAID groups, TPPs, and SDPs can be checked in the Over-
view screen of ETERNUS Web GUI.
Figure 59 ETERNUS Web GUI Screen
Table 19
shows the general status.
Status of the ETERNUS DX is monitored periodically, and the result is displayed as a general status icon with
character strings.
Table 19 General Status of ETERNUS Web GUI
Status
(green)
(red)
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Operation Guide (Basic)
Description
The ETERNUS DX is in a normal state.
An abnormality is detected at a power-off, and I/O access from the server
cannot be received.
60
Copyright 2018 FUJITSU LIMITED
P3AM-7742-12ENZ0