High-Density Drive Enclosure; Front; Rear; Figure 1.24 High-Density Drive Enclosure - Fujitsu ETERNUS DX600 S3 Basic Operation Manual

Chapter 1 Component Name/LED Name
1.3

High-density Drive Enclosure

1.3 High-density Drive Enclosure
An operation panel and a Disk Activity Panel (DAP) are installed in the front of the high-density drive enclo-
sure. I/O modules, power supply units, and fan expander modules are installed in the rear.
Drives are installed in the high-density drive enclosure.
1.3.1

Front

This section provides the names of the components in the front of a high-density drive enclosure.

Figure 1.24 High-density Drive Enclosure

1
1. Operation panel
2. Disk Activity Panel (DAP)
3. Front cover
1.3.2

Rear

This section provides the names of the components in the rear of a high-density drive enclosure.

Figure 1.25 Rear View of a High-density Drive Enclosure

1
5
3
7
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
2
29
Copyright 2014 FUJITSU LIMITED
3
2
6
4
8
P3AM-7742-04ENZ0