Chapter 3
Storage System Monitoring
This chapter describes the status monitoring of the ETERNUS AF.
3.1
Checking LED Status
The status of the ETERNUS AF can be checked by the LEDs.
If the FAULT LED in the operation panel is amber, contact your maintenance engineer.
3.2
Displaying Status via ETERNUS Web GUI
The status of the ETERNUS AF and the usage status of RAID groups, TPPs, and SDPs can be checked in the
Overview screen of ETERNUS Web GUI.
Figure 3.1 ETERNUS Web GUI Screen
Table 3.1
shows the general status.
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
42
P3AG-1932-04ENZ0