Restore Default - Mitel MiVoice 6900 Series Administrator's Manual

Mitel MiVoice 6900 Series IP Phones - Release 1.1 Administrator Guide

Restore Default

The Restore Default option allows you to restore the Mitel MiVoice 6900 Series IP phone to its
factory default settings.
Note: Note: Performing a factory default is only applicable to the phone settings and does not
affect the firmware version loaded on the phone.
To perform a factory default on the Mitel MiVoice 6920/6930 IP phone:
1. Press the
2. Press the Advanced softkey.
3. Input the Administrator password using the dialpad keys (default is 73738) and press the Enter
softkey.
4. Navigate to Restore Default using the navigation keys and press the Select softkey.
Mitel MiVoice 6920 Restore Default
5. Use the left navigation key to select Yes and press the select button (middle button in the
navigation cluster).
Note: Navigate to No and press the select button (middle button in the navigation cluster) to
cancel the request.
To perform a factory default on the Mitel MiVoice 6940 IP phone:
1. Press the
2. Tap the Advanced softkey.
3. Input the Administrator password using the dialpad keys (default is 73738) and tap the Enter
softkey.
4. Swipe left on the screen to change to the second page of settings.
32
(Settings) key on the phone to enter the Static Settings menu.
(Settings) key on the phone to enter the Static Settings menu.
Mitel MiVoice 6930 Restore Default