Mitel MiVoice 6900 Series Administrator's Manual page 18

Mitel MiVoice 6900 Series IP Phones - Release 1.1 Administrator Guide
The VLAN Settings sub-menu allows you to define the VLAN ID you want to associate with the
Ethernet port, configure VLAN Layer 2 Protocol (L2P) priorities, and input Differentiated Servers
Code Point (DSCP) values.
To configure VLAN settings on the Mitel MiVoice 6920/6930 IP phone:
1. Press the
2. Press the Advanced softkey.
3. Input the Administrator password using the dialpad keys (default is 73738) and press the Enter
softkey.
4. Navigate to Network > VLAN Settings using the navigation keys and press the Select softkey.
Mitel MiVoice 6920 VLAN Settings
5. In the VLAN id input field, enter the VLAN number you want to associate with the Ethernet port
using the dialpad keys.
6. Press the down navigation key to navigate to the L2P-related input fields and use the left and
right navigation keys to set the desired priorities. The following L2P-related input fields are
available:
• L2P Default:
Specifies the default VLAN priority value for L2P voice, signaling, and other if they are not
specified. The value has a range of 0 to 7.
• L2P Voice:
Specifies the VLAN priority value for L2P voice traffic in the range of 0 to 7.
• L2P Signaling:
Specifies the VLAN priority value for L2P signaling traffic in the range of 0 to 7.
• L2P Other:
Specifies the VLAN priority value for L2P other traffic in the range of 0 to 7.
7. Press the down navigation key to navigate to the DSCP-related input fields and enter the desired
DSCP values using the dialpad keys. The following DSCP-related input fields are available:
• DSCP Default:
Specifies the default DSCP value for voice, signaling, and other if they are not specified.
The value has a range of 0 to 63.
• DSCP Voice:
Specifies the DSCP value for voice traffic in the range of 0 to 63.
• DSCP Signaling:
Specifies the DSCP value for signaling traffic in the range of 0 to 63.
16
(Settings) key on the phone to enter the Static Settings menu.
Mitel MiVoice 6930 VLAN Settings