Mitel MiVoice 6900 Series Administrator's Manual page 19

• DSCP Other:
Specifies the DSCP value for other traffic in the range of 0 to 63.
8. Press the Save softkey to save your changes.
To configure VLAN settings on the Mitel MiVoice 6940 IP phone:
1. Press the (Settings) key on the phone to enter the Static Settings menu.
2. Tap the Advanced softkey.
3. Input the Administrator password using the dialpad keys (default is 73738) and tap the Enter
softkey.
4. Tap the Network icon.
5. Tap the VLAN Settings icon.
6. In the VLAN id input field, enter the VLAN number you want to associate with the Ethernet port
using the dialpad keys.
7. Tap the applicable L2P-related input field and tap the left and right arrow buttons to set the
desired priorities. The following L2P-related input fields are available:
• L2P Default:
Specifies the default VLAN priority value for L2P voice, signaling, and other if they are not
specified. The value has a range of 0 to 7.
• L2P Voice:
Specifies the VLAN priority value for L2P voice traffic in the range of 0 to 7.
• L2P Signaling:
Specifies the VLAN priority value for L2P signaling traffic in the range of 0 to 7.
• L2P Other:
Specifies the VLAN priority value for L2P other traffic in the range of 0 to 7.
8. Tap the applicable DSCP-related input field and enter the desired DSCP values using the dialpad
keys. The following DSCP-related input fields are available:
• DSCP Default:
Specifies the default DSCP value for voice, signaling, and other if they are not specified.
The value has a range of 0 to 63.
Mitel MiVoice 6940 VLAN Settings
Static Settings menu
17