802.1X - Mitel MiVoice 6900 Series Administrator's Manual

Mitel MiVoice 6900 Series IP Phones - Release 1.1 Administrator Guide
• DSCP Voice:
Specifies the DSCP value for voice traffic in the range of 0 to 63.
• DSCP Signaling:
Specifies the DSCP value for signaling traffic in the range of 0 to 63.
• DSCP Other:
Specifies the DSCP value for other traffic in the range of 0 to 63.
9. Tap the Save softkey to save your changes.

802.1X

The Mitel MiVoice 6900 Series IP phones support IEEE 802.1X and facilitates media-level access
control. It offers the capability to permit or deny network connectivity, control LAN access, and apply
traffic policy, based on user or endpoint identity. This feature supports both the EAP-MD5 and
EAP-PEAP protocols.
The 802.1X sub-menu allows you to define the EAP authentication type as well as the identity and
password used for 802.1X authentication.
To configure 802.1X settings on the Mitel MiVoice 6920/6930 IP phone:
1. Press the
2. Press the Advanced softkey.
3. Input the Administrator password using the dialpad keys (default is 73738) and press the Enter
softkey.
4. Navigate to Network > 802.1x using the navigation keys and press the Select softkey.
Mitel MiVoice 6920 802.1x
5. In the EAP type field, press the left and right navigation keys to enable an EAP authentication
type/method (EAP-MD5 or EAP-PEAP).
6. Press the down navigation key to navigate to the Identity input field and enter the identity or
username used for authenticating the phone.
Note: The Backspace softkey can be used to delete the last digit/character entered and the
ABC/abc/123 softkey can be used to switch the dialpad keys from lower to uppercase as well
as from alphabetic to numeric.
18
(Settings) key on the phone to enter the Static Settings menu.
Mitel MiVoice 6930 802.1x