Static Network Settings - Mitel MiVoice 6900 Series Administrator's Manual

Static Network Settings

The Mitel MiVoice 6900 Series IP phones can be configured to utilize DHCP or static network settings.
The Static Network Settings sub-menu allows you to configure network settings on your phone
manually. Configuring static network settings automatically disables DHCP functionality.
To manually configure static network settings on the Mitel MiVoice 6920/6930 IP phone:
1. Press the (Settings) key on the phone to enter the Static Settings menu.
2. Press the Advanced softkey.
3. Input the Administrator password using the dialpad keys (default is 73738) and press the Enter
softkey.
4. Navigate to Network > Static Settings using the navigation keys and press the Select softkey.
Mitel MiVoice 6920 Static Network Settings
5. Navigate to the applicable parameter's input field using the navigation keys and enter in the
respective values using the dialpad keys. Applicable parameters include:
• IP Address:
IP address of the IP phone.
• Subnet Mask:
The IP address range local to the IP phone.
• Gateway:
The IP address of the network's gateway or default router IP address.
• Primary DNS:
The IP address of the primary DNS server.
• Secondary DNS:
The IP address of the secondary DNS server.
• Call Server IP Address:
The IP address of the call server.
• TFTP Server IP Address:
The IP address of the Trivial File Transfer Protocol (TFTP) server.
• TFTP Server Port:
The TFTP port the TFTP server uses.
Mitel MiVoice 6930 Static Network Settings
Static Settings menu
11