Traceroute; Restore Default - Mitel MiVoice 6900 Series Manual

S
ETTINGS MENU
dscp:
•
DSCP values for default, voice, signaling, and other.

Traceroute

The Traceroute sub-menu allows you to perform a trace request. You can then review the parameters
that the DHCP trace returns. After you have reviewed the trace information, the DHCP Lease is released.
To use the ping tool on the Mitel MiVoice 6905/6910 IP phone:
Press the (Settings) key on the phone to enter the Settings menu.
1.
Use the navigation keys to navigate to Diagnostics and press the Enter key.
2.
Use the navigation key to navigate to Traceroute and press the Enter Key.
3.
Mitel MiVoice 6905 Traceroute
In the Hostname/addrs. input field, enter the hostname or IP address of the network endpoint you
4.
want to ping using the dialpad keys and press the down navigation key to Save the changes.

Restore Default

The Restore Default option allows you to restore the Mitel MiVoice 6900 Series IP phone to its factory
default settings.
Note:Performing a factory default is only applicable to the phone settings and does not affect the
firmware version loaded on the phone.
To perform a factory default on the Mitel MiVoice 6905/6910 IP phone:
Press the (Settings) key on the phone to enter the Settings menu.
1.
Use the navigation keys to navigate to Advanced Settings and press the Enter key.
2.
Input the Administrator password (default is 73738) and press the Enter Key.
3.
Navigate to Factory Default and press the Enter key.
4.
Mitel MiVoice 6905 Restore Default
Mitel MiVoice 6910 Traceroute
Mitel MiVoice 6910 Restore Default
R D
ESTORE EFAULT
57