NAVIGATOR - SIP User and Administrator Guide
•
To enable HTTP, press TURNON.
•
To disable HTTP, press TURNOFF.
•
To enable or disable TFTP, press NEXT.
5. Repeat steps 3 and 4 for TFTP, Telnet, SNMP and SRTP. After you enable or disable a
protocol, that protocol and its new status appears on the display.
6. Do one of the following:
•
To return to the main menu, press EXIT.
•
To return to the default display, press
SRTP Call Encryption Indicator
For information about the Call Encryption setting, see Call Encryption Indicator on page 3. Also
refer to the About the Protocols Page topic of the Administrator's Web Configuration Tool Online
Help (see Accessing the Web Configuration Tool page 3).
Viewing/Modifying the Network Settings
View the IP and MAC Addresses
To view the phone's IP and MAC addresses:
1. Press
(SUPERKEY), and then press the Line 1 key. The IP and MAC addresses appear.
2. Press
(SUPERKEY) to return to the default display.
Modifying Network Settings
To modify network settings using the Web Configuration Tool:
•
Access the Network Configuration page of the Web Configuration Tool.
To modify network settings using the Superkey Menu Interface
1. Press
(SUPERKEY), and then press >> until ADMIN TOOLS? appears on the display.
2. Press OK, and then press ▼ until NETWORK SETTINGS? appears.
3. Press OK, enter your administrator password, and then press SUBMIT.
4. Press NEXT until the network configuration settings you want to change appear.
5. Press REVIEW to view the current settings of the selected setting, and then do one of the
following:
•
(Optional) To enable or disable DHCP, press TURNON or TURNOFF.
•
To change a value, press CHANGE, enter the new value, and then press SUBMIT. After
the information is saved, the next setting appears.
•
To leave a value as it is, press EXIT or NEXT.
6. Repeat steps 4 and 5 until all desired changes have been made.
42
(SUPERKEY).