Turning On Bluetooth Visibility - Motorola APX Series User Manual

English
Bluetooth Search in Bluetooth Standard Pairing method is
used to scan for other Bluetooth devices nearby. It is set to
turn off by default.
The radio only search for HSP devices and Motorola
Solutions MCW & OCW accessories. Radio filters out other
profiles.
Press the preprogrammed Bluetooth Inquiry
On/Off button, to enable the Bluetooth Search
feature.
One of the following scenarios occurs:
• If successful, the display shows SRCH ON followed
by SRCH END when the radio is pairing with a
device found. The display shows <Device Name>
PAIRED to indicate pairing is complete.
• If the feature fails to initiate or the radio fails to
pair with any device, the display shows SRCH END
when the search timer expires without pairing
with any device. Repeat this step.
One of the following scenarios occurs:
• The radio continues to connect to the device. If the
connecting process is successful, the radio sounds an
incremental-pitched tone. The display shows <Device
92
Type>CONNCTED, and the Bluetooth icon turns from b to
a.
• If the device already has pairing records and the
connecting process fails, the radio sounds a short, low-
pitched tone. The display shows <Device Type> CON
FAIL.
• If the connection fails within 6 seconds, you hear a
decremental-pitched tone to indicate that the device is
unpaired. The display shows <Device Type>
UNPAIRED.

Turning On Bluetooth Visibility

Turning Bluetooth visibility on enables other Bluetooth
devices to search for your radio. The visibility of the
Bluetooth is set to turn off by default.
• a. Press and hold the preprogrammed Bluetooth
Inquiry On/ Off button for three seconds to
enable the Bluetooth visibility feature.
One of the following scenarios occurs:
• Keep holding the button although you hear a
short, medium-pitched tone with the display
shows momentary VISIBLE. This indicates the
visibility is turned on successfully.
2