Radio Indications Of Lost Bluetooth Connection; Standard Pairing Feature - Motorola APX 7000 User Manual

6875952M01-NK
Advanced Features
NOTICE: Once a COTS headset is paired to your radio, it is always connected. Therefore the
battery life of the accessory is aligned with the Talk Time power consumption, not the Standby
Time consumption.
Procedure:
Turn on the accessory. Then, place it close to the radio aligning the Bluetooth Pairing Location
(a blue dot) on the radio to the Bluetooth Pairing Location (a blue dot) on the accessory.
If the pairing process is successful, you hear an incremental-pitched tone. The radio begins to
connect to the device.
If the pairing process fails, you hear a short, low-pitched tone. The display shows PAIRFAIL.
Repeat this step.
The radio tries to establish connection with the device once paired.
NOTICE: If the connection fails within 6 seconds, you hear a decremental-pitched tone to
indicate that the device is unpaired. The display shows <Device Type> UNPAIRED. Repeat
this step to re-initiate the pairing process.
If the connection is successful, you hear an incremental-pitched tone. The display shows <Device
Type> CONNCTED and the Bluetooth icon turns from
If the radio has the pairing record of the device and the connection fails, you hear a short, low-pitched
tone. The display shows <Device Type> CON FAIL.
2.14.6

Radio Indications of Lost Bluetooth Connection

The radio shows when the device has a Bluetooth connection. Below are the radio indications when
the connection is interrupted.
The starts blinking for up to 10 seconds. You hear a decremental-pitched tone. The display shows
<Device Type> alternating with CON LOST.
If the Bluetooth device successfully re-connects before the Bluetooth Drop Timer expires, the display
shows momentary <Device Type> CONNCTED, and
fails to re-connect within 10 seconds, the blinking
2.14.7

Standard Pairing Feature

NOTICE: Bluetooth tones, Bluetooth menu, and preprogrammed buttons must be
preprogrammed by a qualified radio technician. Check with your dealer or system administrator
for more information.
Once a COTS headset is paired to your radio, it is always connected. Therefore the battery life
of the accessory is aligned with the Talk time power consumption and not the Standby time
consumption.
The Bluetooth Standard Pairing feature enables your Bluetooth enabled radio to search for other
Bluetooth enabled and discoverable devices. Once the device is discovered, your radio automatically
pairs with the device.
70
to .
shows persistently, or if the Bluetooth device
is replaced by a persistent .