Table of Contents
Advertisement
Radio Indications of Lost Bluetooth Connection
The radio shows
connection. Below are the radio indications when the
connection is interrupted.
The
starts blinking for up to 10 seconds. You hear
a decremental-pitched tone. The display shows
<Device Type> alternating with disconnected.
If the Bluetooth device successfully re-connects
before the Bluetooth 10 second Re-Connection Timer
expires, the display shows momentary <Device
Type> connected, and
Bluetooth device fails to re-connect within 10
seconds, the blinking
.
Standard Pairing Feature
Note:
Bluetooth tones, Bluetooth menu and
preprogrammed buttons must be
preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
when the device has a Bluetooth
stops blinking, or if the
is replaced by a persistent
Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
life of the accessory is aligned with the Talk
time power consumption and not the Standby
time consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable devices. Once a device is
discovered, you can initiate your radio to send a
pairing request to pair with the device.
This feature also enables your Bluetooth enabled
radio to be visible to other Bluetooth enabled devices
and receive request to pair from other devices.
The Standard Pairing feature supports pairing
Authentication Personal Pairing Number or PIN which
ensure your radio recognizes the correct device to
pair. The PIN must be exchanged with the radio or
the device before the pairing completes. Your radio
prompts for the Authentication PIN when needed.
Refer to your device's manual for details about the
Bluetooth Authentication PIN of your device if
needed.
145
English
Advertisement
Table of Contents
