Table of Contents
Advertisement
•
Press the Menu Select button directly below
Send to initiate command.
If the receiving radio received the command, your
radio display shows Ack received.
If the receiving radio does not have encryption key to
decrypt the received encrypted command, your radio
display shows Dec fail.
If the receiving radio is powered off or already killed,
your radio display shows No Ack.
Once the receiving radio received the command, its screen
turns blank, the killed radio is inoperable.
Using Direct Kill to Kill Your Own Radio
Direct Kill allows you to make your own radio inoperable.
Press and hold the programmable button (2-dot) on
the keypad microphone then press the Orange
button until the display turns blank and becomes
inoperable.
Radio Inhibit
This feature allows the system administrator to put a radio
into a non-functional state when the radio is missing or in
an unknown hand. The radio stays in this state regardless
of its power changes.
NOTICE:
If the radio has Inter-system roaming capability, the
system administrator is able to put the radio into a
non-functional state when missing radio roamed to
another system.
The radio can only be uninhibited by receiving an
uninhibited command from the system administrator
or by reprogramming the radio through labtool or
depot CPS only.
Global Positioning System/Global
Navigation Satellite System
NOTICE:
This feature is addressed as GPS across the
manual as the naming convention of the buttons
and strings remain the same as the legacy feature
of GPS.
English
135
Hide quick links:
Advertisement
Table of Contents
