Data Connections - Teldat 3ge Installation Manual

Teldat S.A.
1.2.3.2 With POE Injector
Fig. 5: POE Injector: Aspect
The Teldat-3Ge can be powered through the Ethernet cable, provided it complies with the POE 802.3af standard.
To connect the Ethernet cable with the POE power to the router, please carry out the steps set forth in
cable is POE
Figure 6 shows how to connect the POE injector to the Teldat-3Ge .
Fig. 6: Connecting the power with the POE injector

1.2.4 Data Connections

The Teldat-3Ge has the following available connectors:
1.2.4.1 LAN
Ethernet 10/100BaseT interface to connect to the local area network (LAN). This port is equipped with link status
LEDs: a yellow LED indicates that the physical layer has been established and a green LED indicates frame recep-
tion.
Teldat-3Ge Installation Manual
on page 3.
1 Installing the Router
If the Ethernet
5