Chapter 2: Front/Rear Panel Control & Connectors; Introduction; Front Panel Controls - TDK-Lambda G10-500 User Manual

CHAPTER 2:
2.1

Introduction

The
the user to setup and operate the unit. Before starting to operate the unit, please read the following
sections for an explanation of the functions, controls and connector terminals.
• Section 2.2: Front Panel Controls
• Section 2.3: Front Panel Display and Indicators.
• Section 2.4: Rear Panel Connections and Controls
• Section 2.5: J1 Connector Terminal and Function
2.2

Front Panel Controls

Refer to Figure 2–1 and Table 2-1 for description of the Front Panel controls.
No. Control/Indicator
1 Power Switch
2 Power Supply Model
3 Voltage Encoder and
Button
4 Voltage Display
5 Operation Mode Indicator
FRONT/REAR PANEL CONTROL & CONNECTORS
Power Supply series has a full set of controls, indicators and connectors that allow
Figure 2–1: Front Panel Controls
Description
POWER ON/OFF control.
Model, Voltage & Current Identifier.
Encoder: A high-resolution detent rotary Encoder adjusting
the output voltage and navigating menu.
Button: An auxiliary function to accept the voltage-setting
value in Preview mode.
4-digit 16-segment Voltage display.
Normally displays the output voltage.
In Preview mode, the display indicates the program setting of
the output voltage.
In Menu navigation, the display indicates the selected
function.
CV/CC/CP Operation mode indicator.
10