Table of Contents
Advertisement
CHAPTER 2: FRONT/REAR PANEL CONTROLS AND CONNECTORS
2.1 Introduction
The
Power System series has a full set of controls, indicators (in the standard units) and
connectors that allow the user to set up and operate the unit. Before starting to operate the unit, please
read the following sections for an explanation of the functions, controls and connector terminals.
Section 2.2: First unit Front Panel Controls.
Section 2.4: Front Panel Display and Indicators
Section 2.4: First unit Blank Front Panel.
Section 2.5: First Unit Rear Panel Connections and Connectors.
2.2 First unit Front Panel Controls
Refer to Figure 2-1 and Table 2-1 for description of the Front panel controls.
No.
Control/Indicator
1
Power Switch
2
Manufacturer logo
3
Voltage Encoder and
Button
4
Voltage Display
5
Operation Mode Indicator
6
Current Display
7
Indicators Bar
8
Current Encoder and
Button
9
BACK Button
Figure 2-1: Front Panel Controls and Indicators
POWER ON/OFF control.
TDK-Lambda logo.
Encoder: A high-resolution detent rotary Encoder adjusting the output
voltage and navigating menu.
Button: An auxiliary function to accept the voltage-setting value in Preview
mode.
4-digit 16-segment Voltage display.
Normally displays the output voltage.
In Preview mode, the display indicates the setting of the output voltage.
In Menu navigation, the display indicates the selected function.
CV/CC/CP Operation mode indicator.
4-digit 16-segment Current display.
Normally displays the output current.
In Preview mode, the display indicates the setting of the output current.
In menu navigation, the display indicates the selected parameter.
Refer to the User Manual for description of the front panel Indicators bar.
Encoder: A high-resolution detent rotary Encoder adjusting the output
current and navigating menu.
Button: An auxiliary function to accept the current-setting value, select
menu level, and set parameter value.
Return one step back in menu navigation mode.
32
Description
Advertisement
Table of Contents
