Structure Of Track Roller - Kubota u15-3 Workshop Manual

WSM U15-3

3. Structure of Track Roller

Notes:
1. Fill the bearing with oil (40 cm
2. Use Engine genuine oil SAE30 class CD or equivalent.
3. Use care not to confuse the sides of the shaft circlip.
(Rolled-over side to be fitted in the groove is inner side, while the burred (sharp) side is the outer side)
4. The roller should be turned smoothly after it has been assembled completely.
5. Dimensions of assembling jigs for seal etc. and the assembling procedure are equivalent to those of
RA211-2170 .
(1) Packing, NBR
(2) Spring
(3) Reinforce, ring
(4) Sleeve
(5) Fill grease
Lub oil :Engine oil SAE #30CD class 40 cc
Plug
3
).
II-36
No. Part Name
(1) Track roller
(2) Shaft (Track roller)
(3) Ball bearing
(4) Bracket (1)
(5) Bracket (2)
(6) O-ring
(7) Seal (Floating)
(8) Shaft circlip
(9) Plug (R1/8)
:Apply screw lock agent and tightening
torque, 0.8 kg m
·
Q'ty Remarks
1 FCD600
1 S45C-D
2
1 FCD450-10
1 FCD450-10
2
2
2
1