Table of Contents
Advertisement
k. Water temp. sensor & gauge
1. Water temp. sensor circuit malfunction
Water temp. sensor signal is sent to the auto glow con-
troller.
1) Check couplers
Pull the harness to see if the water temperature sen-
sor coupler is not out of position. Be sure that the cou-
pler harness is tightly connected. (Pull by a 3 kg or
less force.)
• If out of position, attach the coupler tightly and check
the lamp and gauge again.
(1)
II-151
Thermister
(1)
(1) sensor
WSM U15-3
Advertisement
Table of Contents
