Table of Contents
Advertisement
6. Route of Electric Wiring (Front)
(1) Connect the red wires and yellow wires in their respective groups and fix them to the working light frame
by cord clamps.
(2) Clamp the position marked with white tape outside the hole.
Use care so that the wire harness should not be drawn into the hole.
(3) Tighten the black wire together with the bolt.
(4) Pass it under the boom pin.
(5) Fix the clip to the metal.
(1)
(2)
(3)
II-179
(4)
WSM U15-3
(5)
Advertisement
Table of Contents
