Kubota u15-3 Workshop Manual page 195

2 Route of Electric Wiring (Engine Rear)
(1)
(3)
(2)
(7)
(1) Theft-proof key setting terminal
(2) Key setting connector
(3) Slow-blow fuse
(4) Direct the fuse box so that the slot comes to the right.
(5) Pass the battery cord, dozer cable and wire harness to the theft-proof unit through the hole of the vertical
rib.
(6) Insert RA221-5322 battery cord (Plus) into the threaded hole from the front side of the mount.
(7) Facing directly above
(8) Clamp the wire harness and the rubber cap after assembling the terminal.
(9) Pass the power cord through the upper hole.
(10)Pass the minus cord through the lower hole.
(11)The minus terminal should be directed abeam at the machine front.
(12)Pass the plus power cord behind the arch.
(4)
(8)
II-175
(5)
(6)
(9)
(12)
(11)
(10)
WSM U15-3