WSM U15-3
5. Greasing (1)
(1)
(2)
(3)
(4)
(5)
(6)
(1)
Type A (Boss greasing)
Swing supporting points (upper and lower)
(2)
Type A (Boss greasing)
(3)
To swivel bearing balls
(4)
To swivel bearing teeth
(5)
Type A (Boss greasing)
(6)
Type A (Pin greasing)
(7)
Type A (Boss greasing)
(8)
Type A (Boss greasing)
(9)
Type A (Boss greasing)
(14)
(15) (16) (17)
(8)
(7)
(10) Type A (Pin greasing)
(11) Type C (Boss greasing)
(12) Type A (Pin greasing)
(13) Type A (Pin greasing)
(14) As viewed from front of the swivel frame
(15) Swing cylinder bottom
(16) Swivel bearing (teeth)
(17) Swivel bearing balls
(18) Grease the swivel bearing balls and teeth
respectively at 6 positions while turning the
bearing by 90 deg. each.
The balls and teeth may be greased before
assembling.
II-20
(18)
(9)
(11)
(10)
(13)
(12)