Every 1000 Service Hours Or Once Ayear; Replacing Air Filter Element; Every 1500 Service Hours; Checking Fuel Injection Nozzle(Injection Pressure) - Kubota KX 016-4 Operator's Manual

EVERY 1000 SERVICE HOURS OR ONCE A
YEAR
BReplacing Air Filter Element
Open the engine cover and remove the dust cover.
Take out outer element and inner element (safety
element).
Replace inner and outer element.
Installing the dust cover, be sure to its TOP mark (arrow)
faces upward.
(1) Outer element
(2) Inner element (Safety element)
(3) Case
(4) Dust cover
(5) Clamps
A Shorten the replacement period if using in a place
exposed to lots of dust or sandy areas.
REGULAR CHECKS AND MAINTENANCE WORK

EVERY 1500 SERVICE HOURS

BChecking Fuel Injection Nozzle(Injection
Pressure)
Consult your local KUBOTA Dealer for this service.

EVERY 2000 SERVICE HOURS

Do all 50, 200, 500 and 1000 hour servicing at the same
time.
BChanging Front Idler and Track Roller Oil
A Contact your KUBOTA dealer for details.
BChecking Alternator and Starter Motor
A Contact your KUBOTA dealer for details.

EVERY 3000 SERVICE HOURS

BChecking Injection Pump
Consult your local KUBOTA Dealer for this service.

ANNUAL SERVICE

BElectrical Wiring and Fuses
Check the terminals periodically for proper connections.
Loose wiring or damaged cables can cause improper
functioning or short circuiting of the electrical system.
Check wiring
immediately. If a fuse blows out soon after having been
replaced, contact your nearest KUBOTA dealer. Do not
use a fuse other than specified.
and replace damaged components
53