Setup With Pactware™ And Other Adjustment Programs; Connecting The Pc; Parameter Adjustment With Pactware - Vega VEGABAR 53 Operating Instructions Manual

Setup with PACTware™ and other adjustment programs
Connecting the PC directly to
the sensor
34
7 Setup with PACTware™ and other
adjustment programs

7.1 Connecting the PC

3
>PA<
2
Fig. 14: PC connected directly to the sensor
1 RS232 connection
2 VEGABAR 53
3 I²C adapter cable for VEGACONNECT 3
Necessary components:
VEGABAR 53
l
PC with PACTware™ and suitable VEGA-DTM
l
VEGACONNECT 3 with I²C adapter cable (article no.
l
2.27323)
Power supply unit
l

7.2 Parameter adjustment with PACTware™

Further setup steps are described in the operating instructions
manual "DTM Collection/PACTware™" attached to each CD
and which can also be downloaded from our homepage. A
detailed description is available in the online help of
PACTware™ and the VEGA-DTMs.
Note:
Keep in mind that for setup of VEGABAR 53, DTM-Collection
10/2003 or a newer version must be used.
VEGACONNECT 3
PACTware /
1
=
Power supply
VEGABAR 53 - Profibus PA
TM
~