Vega VEGABAR 53 Operating Instructions Manual page 43

Deviation in characteristics
Deviation in characteristics
- Turn down 1:1
- Turn down up to 1:5
- Turn down bis 1:20
Influence of the product or ambient temperature
The following specifications are valid for values within the compensated temperature range,
i.e. 0 ... 80°C (176°F), reference temperature 20°C (68°F).
Average temperature coefficient of the zero signal
- Standard
- Meas. ranges 0 ... 0.1 and
0 ... 0.16 bar
Average temperature coefficient of the
span
The following specifications are valid for values not within the compensated temperature
range.
Average temperature coefficient of the zero signal
- Standard
- Meas. ranges 0 ... 0.1 and
0 ... 0.16 bar
Average temperature coefficient of the
span
Long-term stability (similar to DIN 16086, DINV 19259-1 and IEC 60770-1)
Long-term drift of the zero signal
Ambient, storage and transport temperature
Standard versions
- without PLICSCOM
- with PLICSCOM
Connection G1A front flush acc. to EHEDG
- without PLICSCOM
- with PLICSCOM
VEGABAR 53 - Profibus PA
10)
<0.15 %
<0.15 %
<0.3 %
<0.2 %/10 K
<0.4 %/10 K
<0.2 %/10 K
typ. <0.2 %/10 K
typ. <0.4 %/10 K
typ. <0.2 %/10 K
<0.1 %/year
12)
-40 ... +80°C (-40 ... +176°F)
-20 ... +70°C (-4 ... +158°F)
-10 ... +80°C (14 ... +176°F)
-10 ... +70°C (14 ... +158°F)
Relating to the nominal range, incl. hysteresis and repeatability, determined
10)
acc. to the limit point method.
Relating to the adjusted span, incl. hysteresis and reproducibility.
11)
Acc. to IEC 60770-1 relating to the nominal range.
12)
11)
Supplement
43