Non-Rebreathing Circuit Installation; Figure 4-5 Non-Rebreathing Circuit (Modified Jackson Rees) Connections - Vetland EX3000 Operator's Manual

Non-rebreathing Circuit Installation

Note: The non-rebreathing circuit (modified Jackson-Rees) is for patients less than 10-15 pounds.
Consult with a veterinary professional or refer to the Small Animal Anesthesia Handbook for
more detailed guidance.
Attach the non-rebreathing circuit to the anesthesia system as shown in Figure 4-5. The use of an apnea
sensor is optional.
Endotracheal Tube
Connect to
Scavenger
System

Figure 4-5 Non-Rebreathing Circuit (Modified Jackson Rees) Connections

4-6
Connect to
or Mask
Apnea Sensor
(Optional)
Connect to
Apnea Sensor
Jack
Connect to EX3000
Fresh Gas Outlet
(15 mm Adapter)
System Setup