Alarm And Parameter Setup; Figure 4-7 Alarm And Setup Menu - Vetland EX3000 Operator's Manual

Alarm and Parameter Setup

1. Touch the Setup button. The Alarm and Setup menu displays (see Figure 4-7).
2. Scroll through the operator controllable parameters using the
selection in the left-hand column highlights in blue. Parameters are described in Table 4-1.
3. Set the parameters/alarms as follows:
Note: If no changes are made, all alarms and limits will stay at the default settings.
a. Touch Setup. The first item in the right-hand column highlights.
b. Touch the
set.
c. Touch the Setup button again to shift into set-up mode. The left-hand column parameter
highlights.
d. Touch the
e. Touch the Setup button again to shift back into the left-hand column. The item in the left-hand
column highlights.
f. Repeat Steps b. to e. as necessary to set other parameters and alarms.
4. To close the Alarm and Setup menu, touch the menu area of the screen or touch the Setup button
again.
4-8
buttons to scroll up and down the menu to select (highlight) the parameter to be
buttons to select the desired parameter value.
10:47
Sat Jun 26
2.5

Figure 4-7 Alarm and Setup Menu

buttons. The active menu
Exit Setup
Set Date/Time 2011-_-_ _ _
Audible Breath ON
ON
Apnea Breath Vol 30
Apnea Alarm OFF
Apnea Alarm Time 30
High Press Alarm 30
Continuing Press 10
Screen Brightness 10
Down Button
Alarm and
Setup Menu
Setup Button
Up Button
System Setup