Date/Time Setup; Technician Password - Vetland EX3000 Operator's Manual

Date/Time Setup

Note: The date and time is already set at the factory before the system is shipped. If no changes are
made, the date and time will remain at the default setting.
1. Touch Setup. The Alarm and Setup menu displays (see Figure 4-7).
2. Scroll to Set Date/Time using the
3. Touch Setup. The highlight shifts to the right-hand column.
4. Set the year by touching the
5. Touch the button to shift to the month.
6. Set the month (01-12) by touching the
7. Continue to alternately touch the
(01 to 24), and the minute (00 to 59).
8. Touch the Setup button again to shift the highlight back into the left-hand column and save the
settings.
9. To close the Alarm and Setup menu, touch the menu area of the screen or touch the Setup button
again.

Technician Password

The Technician Password line at the bottom of the Alarm and Setup Menu is for the use of authorized
Vetland service technicians only.
4-10
buttons. It highlights in blue.
buttons until the correct year is displayed.
buttons until the correct month is displayed.
and buttons to shift to and set the day (1 to 31), the hour
System Setup