AT-D868UV CodePlug Programming Guide
RADIO LCD DISPLAY
On the top row of the LED display the following indications can appear:
Reception bars showing signal strength
Within a square "L/M/H/T" transmit power levels showing from Low to Turbo
Headset = Digital Monitor is turned on
GPS symbol gray = no GPS signal received,
"A" indicates a set-up for Auto Power Off
DCS or CTC for Analog reception tone signaling
R
next to a digital channel = connected to repeater with different RX and TX
frequency.
Note: Any updates or corrections to this Programming Guide should be forwarded to
AnyTone at
zsxqlx6833@qxdz.cn
V-1.18
Page 25 of 25
red
= GPS signal received
©
2017
Trygve Svärd KD0PNQ