AnyTone AT-D578UV User Manual

Bluetooth(bt)

Hide thumbs Also See for AT-D578UV:

Table of Contents

Download this manual

Bluetooth(BT) UserGuide

Package contents

Built-in bluetooth module

(inside the radio)

Velcro

When the indicator on the PTT is blinking red, the battery voltage is low.

Connect the USB charging cord into the BT PTT's USB charging port. If the

PTT is not fully charged, the indicator will turn solid red. When the indicator

turns off, the unit is fully charged. A fully discharged battery will need

approximately 1.5 hours to complete a full charge.

Battery Power Indicators of BT PTT button

Red blinking light

Light off

Red solid light

For best performance, keep charging PTT when not in use.

Low battery voltage

Fully charged. Over 24 hours'talk time

Less than a full charge

BT PTT button

USB charging cable

(One out of two)

Table of Contents

Do you have a question about the AT-D578UV and is the answer not in the manual?

Page 1 Bluetooth(BT) UserGuide Package contents Built-in bluetooth module BT PTT button (inside the radio) USB charging cable Velcro (One out of two) Charging the BT Push-to-Talk (PTT) button When the indicator on the PTT is blinking red, the battery voltage is low. Connect the USB charging cord into the BT PTT's USB charging port.
Page 2 PTT button to the car steeling wheel or any other location for convenience. Bluetooth Menu The AnyTone Bluetooth features are accessed from the radio menu. If the Bluetooth option is installed on the radio, the Bluetooth Menu will appear in the radio Main Menu.
Page 3 Getting Started Step One: Pairing the radio with BT PTT button Press the BT PTT button, so the blue light is blinking. The BT PTT is now in ● pairing mode. Turn on radio and go into bluetooth menu, turns BT On in BT On/Off menu. ●...
Page 4 ● entertainment systems, it cannot be guaranteed that it will work with all of these devices. Anytone will continue to improve the Bluetooth system to allow more ● car models to be connected to our radios. Updating of the Bluetooth firmware in the radio and in the PTT module may be required to achieve these improvements.