Pilot Frequency; Tot(Time Out Timer); Scan Dwell Time Setup; Mic Gain Setup - AnyTone AT-778 User Manual

30: Auto power off after 30m
60: Auto power off after 1h
120: Auto power off after 2h
OFF: Disable Auto power off
Default: OFF

Pilot Frequency

Enter No.15 function menu , the LCD displays "TB: 1750".
This function uses to start repeater .It needs a certain intensity Pilot
Frequency to start dormant repeater.As usual,no need to send pilot
frequency again once repeater started.
1000: Pilot frequency 1000Hz
2100: Pilot frequency 2100Hz
1450: Pilotfrequency 1450Hz
1750:Pilot frequency 1750Hz
Defualt: 1750Hz

TOT(TIME OUT TIMER)

Enter No.16 function menu , the LCD displays "TOT: 3".
The time-out timer limits continuous transmitting time. When transmit
time last over programmed value, the transmitting will stop and emit a
prompt.
1-30: 1-30 minutes range available by 1
minute/step
OFF: Turn off TOT function.
Default level: 1

Scan Dwell Time Setup

Enter No.17 function menu , the LCD displays
:"SCAN: TO".
Function Menu
This ardio has 3 kinds of Scan Dwell Time
way.
TO: It pauses 15s once scanning a
matching signal,then resume scan.
CO: It pauses once scanning a matching
signal, signal disappeared then resume
scan.
SE: It stops once scanning a matching
signal.
Default: TO

MIC GAIN SETUP

Enter No.18 function menu , the LCD displays
"MIG: 7"
1-16: Total 16 levels available.
Default level: 7

LCD contrast ratio setup

EEnter No.19 function menu , the LCD
displays "BRI:10".
1-30: Total 4 level backlight available.
Default level: 10

Backlight color

EEnter No.20 function menu , the LCD
displays "COL:OR".
This radio has 3 backlight colors:
OR: Orange
8
19