Control Panel - Grizzly G0772 Owner's Manual

Control Panel

M N
AE AD AC
M. Keypad. For entering desired angle of saw
blades.
N. Blade Angle Display. Displays current angle
of saw blades.
O. Main Blade Up Key. Increases height of
main saw blade.
P. Scoring Blade Left Key. Moves scoring
blade left to align with main blade.
Q. Arbor RPM Display. Displays current RPM
of saw blade.
R. Scoring Blade Up Key. Increases height of
scoring blade.
S. Main Blade ON Button. Enables power to
main blade.
T. Scoring Blade ON Button. Enables power
to scoring blade.
U. Emergency Stop Button. Turns both motors
OFF and disables control panel. To reset,
twist clockwise until button pops out.
Model G0772 (Mfd. Since 05/15)
O
P Q
AB
Z Y
AA
Figure 3. Control panel functions.
R S
W
X V
V. Motor OFF Button. Turns both motors OFF.
W. Scoring Blade Down Key. Decreases height
of scoring blade.
X. Scoring Blade Right Key. Moves scoring
blade right to align with main blade.
Y. Main Blade Down Key. Decreases height of
main saw blade.
Z. "+" Key. Manually increases angle of saw
blades in increments of 0.1".
AA. Start Key. Starts trunnion movement after an
angle has been entered.
AB. Stop Key. Stops trunnion movement.
AC. "-" Key. Manually decreases angle of saw
blades in increments of 0.1".
AD. Set Key. Sets blade angles entered into key-
pad. Also used for calibration.
AE. "C" Key. Clears typed entries in display.
T U
-5-