Network Pin Code Setting; Pjlink And Password Setting - Canon LV-8227A User Manual

Network PIN code setting

This is to set the Network PIN code to restrict
the access from an unauthorized person
through the network.
Enter a 4-digit number as the Network PIN
code onto the text box and click Set button.
The projector begins restarting and it takes
about 10 seconds. Close (Quit) the web
browser and access to the login page again in 10 seconds. This is to perform the login
authentication firmly.
The default Network PIN code [0000] means no Network PIN code is set.
W hen you connect the projector to the network, it is recommended to set a new Network PIN
✐
code. Only a four-digit number is valid for the Network PIN code.

PJLink and Password setting

This is to set the PJLink password authentica-
tion on or off. If set "ON" with the PJLink pull-
down menu, the password must be required.
Enter a password* onto the text box and
click Set button.
1 to 32 alphanumeric characters can be used for the password.
✐
What's PJLink?
The projectors equipped with PJLink function can be used together on the same network,
regardless of model or brand, for centralized control and monitoring. This standard was
established by the Japan Business Machine and Information System Industries Association
(JBMIA). Please visit the Website at http://pjlink.jbmia.or.jp/english/.
PJLink Notice
The projector is compliant with PJLink Standard Class 1 of JBMIA, and it supports all com-
mands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
Projector Input
COMPUTER ANALOG PC
COMPONENT
S-VIDEO
SCART
HDMI HDMI
VIDEO VIDEO
PJLink Input Parameter
RGB 1 11
VIDEO 3 23
VIDEO 2 22
RGB 2 12
DIGITAL 1 31
VIDEO 1 21
Initial setting
23