Setting Up The Network; Setting Basic Information [Network] - Canon WUX5000 User's Manual & Installation Manual

Setting Up the Network

■Setting Basic Information [Network]

From [Network] in the settings window, you can log into the web screen and set basic
network information. For the setting procedure, refer to
Password
User name
New password
Confirm new password
TCP/IP
DHCP
IP address
Subnet mask
Default gateway
If settings related to TCP / IP were changed, it is necessary to disconnect and reconnect to
the network. If the network subnet mask was changed, select [Subnet mask] in the above
window and set the new subnet mask.
Downloaded From projector-manual.com Canon Manuals
Item
When logging into the web screen,
enter the user name in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
When logging into the web screen,
enter the password in 1-byte
alphanumeric characters and
symbols (4 -15 characters).
For confirmation, enter the same
password that you entered in [New
password].
Select whether to turn the DHCP
function on or off. If the function is
on, because the IP address is
acquired from the server, it is not
possible to enter the [IP address],
[Subnet mask], and [Default gate-
way].
Enter the IP address of the projec-
tor in 1-byte numbers.
Enter the subnet mask in 1-byte
numbers.
Enter the default gateway IP
address in 1-byte numbers.
page
Explanation
182
177.
Factory default setting
root
system
system
OFF
192.168.254.254
255.255.255.0
0.0.0.0