Setting Interface - Epever UP1500-M3222 User Manual

3.4 Setting interface

1) Common interface
Operation:
Step1: Press the
Step2: Press the
Step3: Press the
Step4: Press the
Setting：
Item LCD
1 BTP Battery type
2 CSP Charge source priority
3 OSP Output source priority
4 TMU Temperature unit
5 BLT Backlight time
6 BAS Buzzer alarm switch
7 LVD Low voltage disconnect voltage
8 LVR Low voltage reconnect voltage
★The voltage parameter are referred to 25℃, and twice in 48V system.
NOTE: When Output source priority is Battery and the battery voltage less than the
Low Voltage Disconnect Voltage(LVD adjustable), the system will switch utility to
supply power for load.
button and hold on 5s under the real-time interface.
button and hold on 5s under the setting parameter interface.
button to enter the parameter.
button to exit the setting interface.
Instruction Default
AGM
Solar
priority
Battery
℃
30S
ON
★
21.6V
★
25.0V
13
Range
AGM
GEL
FLD
USER
Solar priority
Utility priority Utility & solar
Solar
Battery
Utility
℃/℉
30S/60S/100S
ON/ OFF
★
User 21.0～22.6V
★
step size 0.2V
★
User 24.0～26.0V
★
step size 0.2V