6 Parameters
• The manual control level display appears as shown below.
Function
Process value
Set point
MV (Manual MV)
*
When the Manual MV Limit Enable parameter is set to ON, the setting range will be the MV lower
limit to the MV upper limit.
Related Parameters
See
See
Standard or Heating/Cooling (Initial Setting Level): Page 6-45
6 - 40
PV/MV (Manual MV)
E5EC/E5AC
25
100
50.0
PV/SP/Manual MV
Temperature: According to indication range for each sensor.
Analog: Scaling lower limit −5% FS to Scaling upper limit +5% FS
(Refer to A-7 Sensor Input Setting Range, Indication Range, Con-
trol Range.)
SP lower limit to SP upper limit
Standard control
Position-proportional control
Heating/cooling control
E5CC
PV/Manual MV
Monitor range
Setting range
−5.0 to 105.0*
−105.0 to 105.0*
E5@C Digital Temperature Controllers User's Manual (H174)
25
50.0
Unit
EU
EU
Unit
%