Getting Started; Initial Product Inspection - Tektronix ECO8000 Series User Manual

Getting Started

Initial product inspection

ECO8000 Series Automatic Changeover Unit User Manual
Perform the following product inspection procedure when you receive your
instrument:
1. Inspect the shipping carton for external damage, which may indicate damage
to the instrument.
2. Remove the instrument from the shipping carton, and then check that the
instrument has not been damaged in transit. Prior to shipment the instrument
is thoroughly inspected for mechanical defects. The exterior should not have
any scratches or impact marks.
NOTE.
Save the shipping carton and packaging materials for instrument
repackaging in case shipment becomes necessary.
3. Verify that the shipping carton contains the basic instrument, all modules
you ordered, the standard accessories and any optional accessories that you
ordered listed in the table. (See Table 1.)
Contact your local Tektronix Field Office or representative if there is a problem
with your instrument or if your shipment is incomplete.
1