Safety Compliance - Tektronix ECO8000 Series User Manual

Australia / New Zealand
Declaration of
Conformity – EMC

Safety compliance

EU declaration of
conformity – low voltage
U.S. nationally recognized
testing laboratory listing
Canadian certification
Additional compliances
Equipment type
Safety class
ECO8000 Series Automatic Changeover Unit User Manual
Complies with the EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
EN 55022:1987. Radiated and conducted emissions, Class B, in accordance
with EN 55103-1:1996.
Australia / New Zealand contact.
Baker & McKenzie
Level 27, AMP Centre
50 Bridge Street
Sydney NSW 2000, Australia
This section lists the safety standards with which the product complies and other
safety compliance information.
Compliance was demonstrated to the following specification as listed in the
Official Journal of the European Union:
Low Voltage Directive 2006/95/EC.
EN 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
UL 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
CAN/CSA-C22.2 No. 61010-1. Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use – Part 1: General
Requirements.
IEC 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
Test and measuring equipment.
Class 1 – grounded product.
Compliance information
ix