Table of Contents
Advertisement
ECO8000 Series Automatic Changeover Unit User Manual
NOTE.
The e-mail client used by the ECO8000 Series does not support the TLS
(Transport Layer Security) protocol. This protocol is used by most ISPs and free
e-mail services such as Google Gmail, Yahoo! Mail. etc.
Some e-mail servers do not require a login name and password. Before you
configure the e-mail reporting parameters, it is recommended that you contact
your local network administrator to determine the e-mail server address and to
determine whether an e-mail login name and password are required.
EMAIL SERVER ADDR. Select this menu item to view the IP address of the e-mail
server. Press the ENTER button to edit the address. Use the left (◄) or right (►)
arrow button to select one of the address digits, and then use the up (▲) or down
(▼) arrow button to edit the selected address digit. Press the ENTER button to
implement the new e-mail server address.
NOTE.
The default value for the e-mail server address is all zeroes, which disables
the e-mail output.
EMAIL LOGIN NAME. Select this menu item to view the login name used to access
the e-mail server. Press the ENTER button to edit the login name. Use the left
(◄) or right (►) arrow button to select one of the name digits, and then use the up
(▲) or down (▼) arrow button to edit the selected name digit. Press the ENTER
button to implement the new e-mail login name.
EMAIL PASSWORD. Select this menu item to edit the password used to access the
e-mail server. The characters of the password are represented by "*" characters.
The default password is "welcome".
Press the ENTER button to edit the login password. Use the left (◄) or right
(►) arrow button to select one of the password digits, and then use the up (▲)
or down (▼) arrow button to edit the selected password digit. The password
character appears briefly as you press the up (▲) or down (▼) arrow button
before it is replaced by the "*" character.
The password can be up to 18 characters long. Once you start entering the
password, you cannot use the left (◄) arrow button to backspace to a previous
character. If you make an error while entering the password, press the BACK
button to exit the edit mode, and then reenter the password edit mode. Press the
ENTER button to implement the new e-mail login password.
EMAIL ADDRESS FROM. Select this menu item to view the e-mail address that
the e-mail server will use to send the e-mail. Press the ENTER button to edit the
address. Use the left (◄) or right (►) arrow button to select one of the address
digits, and then use the up (▲) or down (▼) arrow button to edit the selected
address digit. You can enter an e-mail address up to 40 characters long. Press the
ENTER button to implement the new e-mail address.
Menus
77
Advertisement
Table of Contents
