Getting Started; Table 1: Application Software Version Required - Tektronix 80E02 User Manual

Getting Started

80E00 Electrical Sampling Modules User Manual
The Tektronix 80E01, 80E02, 80E03, 80E04, and 80E06 sampling modules are
high-performance sampling modules that can be installed in the following main
instruments:
H DSA8200 Digital Serial Analyzer
H CSA8000, CSA800B, and CSA8200 Communications Signal Analyzers
H TDS8000, TDS8000B, and TDS8200 Digital Sampling Oscilloscopes
Proper operation of the electrical sampling modules requires that the appropriate
application software is installed on the main instrument. In Table 1, each new
release of software supports the additional electrical modules as well as all
electrical modules supported by earlier software versions.
To display the version installed, select About from the Help menu of the main
instrument.

Table 1: Application software version required

DSA8200 and TDS/
CSA8000 application
software version
1
1.0.0 or greater
1
1.4.0 or greater
1
Product application software version 1.x.x requires the Windows 98 operating
system.
Additional modules supported
80E01, 80E02, 80E03, 80E04
80E06
1