Table of Contents
Advertisement
Remote control
Operational
considerations
96
When you operate the Web Interface, be aware of the following operational
considerations:
CAUTION.
If the SNMP community strings are changed from the factory-default
values of "public" and "private" to some other user-defined strings, the Web
Interface will not operate.
It is recommended that a maximum of four simultaneous users be connected to the
instrument using the Web Interface. If more users are connected, it may result in
lower performance and inconsistent behavior.
Some front panel operations may interrupt or reduce the performance of the Web
Interface. For example, the Web server may experience temporary delays when
many buttons are being pressed on the front panel.
Levels of control. Use the SYSTEM CONFIG menu to configure the level of
instrument control that is available from the Web Interface. The following levels
of control are available:
Full control: All settings can be changed.
Read only: Settings can be viewed but not changed.
Disabled: No instrument access allowed by a Web browser.
Supported Web browsers. For best results, use Google Chrome, Mozilla Firefox,
Safari, or Internet Explorer 9.0 or later when you connect to the ECO8000 Series
Web Interface.
NOTE.
The Web Interface requires Javascript to run.
Ease of use. Most instrument controls and views are easier to access and
configure using the Web Interface. Examples of where this is especially true are:
Viewing instrument status
Viewing the Event Log
Viewing diagnostic results
Configuring event reporting
Configuring e-mail reporting
Configuring channel settings such as threshold levels, labels, etc.
ECO8000 Series Automatic Changeover Unit User Manual
Advertisement
Table of Contents
