Table of Contents
Advertisement
Figure 21: SYSTEM CONFIG menu – part 3
ECO8000 Series Automatic Changeover Unit User Manual
NOTE.
The ECO8000 Series must be in Manual mode to make changes in the
SYSTEM CONFIG menu that will effect the basic ECO operation. Examples
of settings that can only be made in Manual mode are the SPG input trigger,
expansion port, startup delay, front panel timeout, initialize hardware, and force
relay path.
If these types of changes are attempted when the instrument in Auto mode, a
warning message will pop up on the LCD display and the Web Interface. Most
of the menus in the SYSTEM CONFIG menu do not require the instrument to be
in Manual mode.
Menus
67
Advertisement
Table of Contents
